erch2014
Computers

Effective tips on how to install windows xp on a laptop

So, you bought a computer, and on it there is no favoriteoperating system - Windows XP. What to do in this case? Read the guide for beginners how to install Windows XP on a laptop. The procedure, in principle, is not particularly complicated, the main thing is to repeat the steps of the installation step-by-step.

Introduction to the installation Windows

First of all, it is necessary to find out on whichThe interface is connected to your hard disk - IDE or SATA. Why is it important to read such documentation? Because in the original Windows distribution there is no software for some Intel SATA chips. Identify such an interface will not, like the device connected to it. And then how to install Windows XP on a laptop?

Fortunately, most devices allowinclude the so-called IDE-compatible mode. This is done through the BIOS. And if this option is activated, Windows recognizes any SATA hard drive for "its own". However, if your chipset is not from Intel or AMD 7, the compatibility option is not needed.

Recording the installation distribution

Before installing Windows on a laptop withSerial Ata drivers, you need to find or create an installation distro. This is a collection of necessary files in a packed form, which contains the operating system, drivers and application programs. There are several approaches to creating a set of SATA drivers:

  1. Write to the floppy disk. At the time of installing windows, a message will flash that when you press the F6 key, you can install additional drivers from the floppy disk. But if there is no usb-drive, then in such an installation there is no sense.
  2. After installing the system, install the necessary software there, and then disable the compatibility mode.
  3. Embed SATA drivers in the original distribution.

We will dwell in more detail on the ability to install Windows XP on a laptop with built-in SATA drivers. The stages of the installation process are shown below.

  • Write a packed copy of Windows XP (distribution) to a CD. It is assumed that the integration of the drivers was successful.
  • To put in the BIOS the first boot device CD-ROM drive. In this case, the system setup program will start automatically.
  • When the system is already installed on a PC or laptop, it will remain to install the SATA drivers from the CD.

How to install windows xp on a laptop. Integrating drivers step by step

  • Copy the distribution, as it is, to any unoccupied partition, for example, D, to a specific folder. Download the driver from the Internet resources dedicated specifically to this topic.
  • Alternatively, extract the image of the system CD in the .iso format using the appropriate archiver.
  • Install the program to build windows - nLite.
  • Run it for execution. Specify the location of the distribution.
  • Select the "Driver" and "Bootable ISO image" items.
  • Click the "Import" button and specify the location of the drivers (folder).
  • Then we select a specific driver from intel or amd, depending on the manufacturer of the chipset.
  • In the "apply changes" dialog box, we agree and click "yes".
  • The final version of the distribution is written to the CD with the option Direct Burn-Recording.
  • Once again we agree, now on the process of recording. After its completion, the system distribution with SATA drivers is generated.

How to start the installation Windows

Before powering on, enter the BIOS by holding the ins, del, F8 or other key pressed. When loading at the bottom of the screen, it will be displayed what to click.

Find the Bootable or Boot tab, go to the list of identifiable devices.

Use the +/- or, possibly, F5 / F6 keys to change the boot order of the system from the devices. The CD-ROM drive should be the first in the list.

Save the changes and reboot the laptop.

Next, the task of how to install Windows XP onlaptop, will assume the installation wizard. You may need to enter the product key and answer a few questions about the regional settings. Also, in the process of the wizard, there will be questions about installing the network, that is, installing the standard version of the TCP / IP protocol or with the selection of individual subcomponents. The whole work process takes about 30-40 minutes on average.

</ p></ p>
Read more: