Cable laying in the trench: entrust the work to professionals

The main purpose of the cable line is to transport electricity to the consumer from sources. To make this possible, it is necessary to do some work. Among them:

Project implementation.
Planning the route.
Excavation.
Cable laying in the trench.
Pipe laying.
Laying the cable in the pipes.
Cable crimping.
Measurements.
Installation to electrical appliances and cable equipment.

Installation of electrical equipment in anythe building provides that the cable will be laid in the trench. Underground power line will preserve the appearance of the site and protect the cable from the effects of unfavorable weather conditions. Even before the work starts, you need to think through all the nuances. The newly constructed object should have cable laying in the planned estimate. After all, if the building is already built, it is much more difficult to accomplish. In this case, the architects will need all the communication schemes. Thus, the described work may require considerable effort from the customer.

If you take into account all the subtleties and nuances, then the gasketcable in the trench can be not so difficult task, and you can solve it yourself. But if you want to perform these works as quickly and qualitatively as possible, you will have to turn to special firms: their specialists will do everything on a professional level. Moreover, there are some norms and requirements that must be adhered to when digging an earth trench. And a man without experience will be more difficult to comply with all the regulations.

Cable laying in the trench: highlights

1. Lay the cable at a depth of at least 0.7 meters.

2. In a single trench, several pieces of cables with a voltage of less than 10 kV can be laid.

3. The width of the trench must be such that the distance between the cables is less than 100 mm.

All the difficulties associated with thekind of work, you can avoid, if you use the services of an executing company. In this case, you will only need to present to the masters all the permits and accept the completed work.

For the transmission of electricity, variouscables. For laying in the ground lines it is necessary to have project documentation. It will allow you to plan the time of work and the budget of installation. Without this document it is impossible to connect to the power grid.

A 10 kV cable is only allowedspecialized companies and organizations that have all the permits and permits for such types of work. The installation of these power lines is a very time-consuming and responsible process. The laying of such a cable will require the availability of a sufficient number of tools, tools and materials.

At last we will consider a financial question. The laying of a cable in an earthen trench is a costly (materially) type of work. For what it is necessary to pay: