How to glue wallpaper on whitewashing? Instructions and tips

Whitewashed - eco-friendly finishingmaterial, however, it is used less and less often for repairs. As a shortcoming, it is necessary to carry out repairs every 3 years. Many people think about how to paste wallpaper on whitewashing. Some advise to strengthen the finishing coat with a primer, treat the surface with a concrete contact or stick a test piece.

If you are still thinking about how to wallpaper wallpaper on whitewashing, you should take into account that there is no guarantee that such a coating will last long enough.

Sealing walls with wallpaper

Sometimes owners of apartments and houses useThe method of gluing wallpaper to whitewash in the case when the quality of repair is not required special requirements. In this case, you can refresh the room in just one day. But if you do not prepare the walls, then such work will be a waste of time.

When paper glue is applied to paper wallpaper, theyrazmokayut and become wider. When drying, the canvas will shrink, acquiring its original size. The biggest load will fall on the edge of the wallpaper, so they will disperse at the seams. On an unprepared surface, the wallpaper must be overlapped.

If you are thinking about how to paste wallpaper onwhitewash, you must first remove the old finishing layer around the perimeter of the room, after that the corners are cleaned, a deep penetration primer is applied to the wall, and then the adhesive composition is prepared.

The master should cut the wallpaper, and in the course of workhandle the corners of PVC glue, this applies to the top of the wall. When gluing wallpaper on a non-woven base, the composition should be applied to the wall. If you plan to paste paper wallpaper, then apply glue to the back side, and then leave the canvas for a few minutes for swelling. At the next stage the wallpaper is pasted, and in order to hide the seams, the stripes must be laid, starting from the window.

Why you can not wallpaper wallpaper on the whitewash

Many novice home masters are askedthe question of whether it is possible to paste wallpaper on whitewashing. It should start with the fact that the particles of calcareous or chalky whitewash have a shallow fraction and are almost weightless. When whitewashing is applied to walls or ceilings, it is retained by surface tension. As soon as moisture evaporates, whitewash dries and forms an even coating.

The layer can be compared with a layer of dust, on itit is enough to hold a hand, as on the fingers will remain chalk. From this it follows that whitewashing can not withstand the additional load. After pasting the wallpaper, you will encounter the fact that they will depart from the surface. If you want to paste wallpaper, do not apply whitewash to the wall, because in this case the paper will go away with the top layer.

Will priming help

There is an opinion that when appliedprimer, it penetrates into the inner layers of the whitewash. However, lime is poorly wetted and has water-repellent characteristics. After the completion of the priming works, it seems that the whitewash is strengthened, because it no longer spoils the hands. But the primer only forms a film on the surface, and the grip of materials remains the same.

How to avoid mistakes

If you want to paste wallpaper after whitening, do notIt is worthwhile to trust the sellers, who assure that the primer perfectly permeates the top layer of the lime. The task of the seller is to sell the goods, your task is to perform quality repairs. Do not throw away excess money, using impregnations that come with the ingredients whitewash into a chemical reaction, as a result you get only yellow stains.

Recommendations for cleaning whitewash

If before you paste the wallpaper you still decidedget rid of whitewash, it should be remembered that the work will be accompanied by the formation of a large amount of dust and dirt. At the first stage, the furniture is covered with a film, the floor is covered with newspapers, and the top layer is wetted with warm water. For this, it is most convenient to use a wide brush with natural nap. The lime can be scraped off the surface with a spatula, then the walls or ceiling are treated with an acrylic primer. At the final stage, you should collect the garbage and thoroughly rinse the floor with water with the addition of vinegar.

Recommendations of a specialist

If you are thinking about the question of howpaste the wallpaper on the whitewash, then first you should decide whether the surface of the lime. Sometimes it is confused with chalk putty. If the latter is fairly well held on the surface, then it is not worth it to get rid of. However, if it's still about whitewashing, then with a rough wall, removing it can be quite difficult.

If the technology of repair was notthere are special requirements, whitewashing could be applied to the plaster layer without puttying. In this case, the lime will fill the depressions, from which it will be difficult to remove. For work, the wall is wetted with water, the top layer of whitewash is removed with a spatula, and then with a sponge or brush the remaining layer should be well soaked.

It is best to abandon the foam sponge, becauseit will soon become worthless. It is recommended to work with a stiff brush that has a handle. Completely get rid of this decorative layer is impossible, so the wall should be primed to strengthen the remaining particles of lime.

Conclusion

Before you post wallpaper on the limewhitewash, still it is recommended to try to remove it. If the old decorative layer is thin enough, then you need to use a rag to prevent scratching the wall. Once the whitewash has been removed, the primer should be applied to the substrate in two layers. After waiting for drying, you can proceed to further work.

If you remove the old layer of lime, there is no desire, thenwallpaper can be pasted and butted, while in the docking areas under the wallpaper is glued a special strip, which will ensure better adhesion of the edges. When pasting corners, the top of the canvas should be cut, which will be located along the line. This will not only align the wallpaper, but also bring out the angle.