Feeder for chickens own hands: cheap, fast and efficient

To grow well, gain weight and be healthy,a living organism needs food in sufficient volume for it. Those who grow chickens and chickens on their farmstead are too well aware of this. Suffice it to say that in the first seven weeks of life the chicken, from which a full-grown hen should grow, eats about one and a half kilograms of mixed fodder. If there are dozens of such chickens, it is necessary to solve the problem of timely and sufficient nutrition.

Ideally, the chicken itself is looking for food for its pets. But since we need to provide them with all the chickens, we have to get feeders. Otherwise, a lot of time will be wasted, which is traditionally not enough for other economic matters. The task - once to fill up the feed in the tank and go quietly back home - is solved with a minimum of costs, if you make feeders for chickens with your own hands. With the widespread distribution of plastic containers of various shapes and volumes, this issue is further simplified. It is enough to have a minimum of tools and a little wit.

The first bird feeder for the chickens is made bybased on the newly acquired chicks. The design will go one plastic bucket from under the seal and one disposable plate (if you want, calculate their value themselves). The cutters make oblique incisions in the form of teeth along the entire circumference of the bucket, so that it becomes like a small tower of the fortress. "Bites off" unnecessary handle. In the bucket the mixed feed is poured, from above it is covered with a plate and turns over, and on the bottom the sinker lies for stability. Chickens peck food, and she spills herself into the plate as she expends.

When your pets grow a little, thena feeder for chickens is needed, made with own hands, more. To make it, you need to take a plastic bucket with a capacity of 3-5 liters and a round four-section dog bowl. And the bottom of the bucket should close the bowl by no more than half. In its bottom and the edges of the bowl sections, four holes are drilled to fasten together with screws and nuts. Then, closer to the edges of the bottom, four more holes are drilled, so that they are directly above the sections. After fixing the structure it remains to fill the bucket with compound feed and install it in the henhouse. The handle is not removed this time: this portable feeder is very convenient to use.

If you have so many chicks that, likeit is said that there is no place for the apple to fall, and the stern needs to find a permanent place, there is already a need for a large and solid feeder for chickens. It is quite possible to make it with your own hands. For the capacity for mixed feed requires a ten-liter canister, which cuts off part of the bottom or the entire bottom. A small plastic basin will serve as a bowl. Its upper part needs to be cut in such a way that the chicken feeder does not prevent them from getting to the food. The canister is positioned above the center of the basin on three supports of a suitable material, bent from the center to the edges for better stability. Supports are fixed to the tank with bolts; It is also possible (albeit not necessarily) to do this with the basin as well. In the canister, the lid is opened and the feed is poured inward. The handle ensures the mobility of the structure.

As you have already seen, the bird feederwith their own hands is done quickly, while it is reliable and suitable for almost any volume of mixed fodder. It greatly facilitates the life of the owner of the farmstead, since chickens, especially broilers, need constant access to food, and from time to time during the day, pour food to the bird rather troublesome.

</ p>