Canopy for air conditioning for a few hours

By the wall unit located on the sidestreets, it is easy to guess that this room is air-conditioned. This block is quite strong, and its base is capable of withstanding heavy loads in winter in the form of snow or frozen water. However, this fact is not a guarantee that the unit will withstand icicle attacks.

Often above the block is a visor forconditioner. This design is not supplied with the device, and its manufacture falls completely on the shoulders of the owners of the air conditioner. Installation of the visor is mandatory in cases where the roof of the house is gable and on the eaves hang icicles, which, when falling, can damage the outdoor unit.

To avoid unpleasant situations, it is necessary toInstall the visor for the outdoor unit of the air conditioner. For a person who knows how to use a tool, it is not difficult to build such a structure.

First you need to decide on the size,which will have a visor for the air conditioner. This is very simple: you just need to look in the technical passport, which indicates the dimensions of the air conditioner. If this is not found, just measure the dimensions of the outer block with a tape measure. The most common size of the visor is 1x0.5 meters.

Prefabricated the frame, whichwill be attached visor. When it is manufactured it is recommended to use a metal corner, which will ensure the strength of the structure and it will not be expensive for money. The corner itself must be galvanized, which will prevent corrosion. The height of the support should be 25 centimeters.

Angle of inclination, under which is locatedthe surface of the visor to the ground, should be around 70 degrees. An increase in the angle of inclination of this design will lead to the fact that snow will accumulate on the surface of the visor in the winter, which can eventually lead to a deplorable result.

The material with which you can covera visor for the conditioner, is various. The cheapest material in this case is channel polycarbonate. This material is easy to process, and a variety of colors will allow you to choose the most suitable option.

To fix the roofing material to the frame,which is made specially for a visor for air conditioning, it is best to use self-tapping screws. In this case, it is necessary to take into account the thickness of the corner from which the frame is welded and the thickness of the selected material for the roof. In most cases there are enough self-tapping screws 25 mm long for metal.

Mount the peak to the wall is best anchoredbolts. This will give the structure the necessary strength and resistance to various weather conditions, which will exclude its separation from the wall during a strong wind.

Thus, make a visor forconditioner, the price of which will be low, you can and yourself. This will eliminate damage to the outdoor unit and protect it. Making this simple design with your own hands, you can save your money.

</ p>