Sound does not work after upgrading Windows 10 to a laptop

Now most computer users have startedcomplain that they do not work sound after the upgrade of Windows 10. It has long been known that this operating system is full of errors and flaws. But their Microsoft Corporation is trying to eliminate it as soon as possible. Not always successfully, but still. What are the reasons for the sound to refuse to work on Windows 10? What should I do in this case? Let's try to figure this out so that in the future there are no problems.

Turned off

Perhaps the most common and rather stupidan option you can imagine is when the sound does not work after the Windows 10 update, because the settings have simply disconnected at the end of this event. Sometimes during the process the sound card stops working. And after the update in the settings, the sound is simply turned off.

In this case, it must be enabled. To do this, pay attention to the image of the mixer in the tray, about the clock and the current date. If there you saw a red crossed circle, then the problem is precisely this. Press the mixer and adjust the volume. That's all, no torture. As already mentioned, this is a fairly common phenomenon. But nevertheless, users say that after the Windows 10 update, the sound does not work for them for other reasons. A mixer or not, or it shows that all settings are enabled in the system. What to do in this case?

No drivers

For example, remember, you installed driversfor a sound card or not. Often, after the installation of the operating system is completed, up to "dozens" about this event are simply forgotten. And there is nothing surprising, that without drivers the sound does not work.

The situation is being rectified, as it is not difficult to guess,installation of missing elements. Please note: the corresponding software should be designed specifically for Windows 10. Otherwise, the result will be zero. Install the drivers, reboot the computer and see what happened. If the error is fixed, you do not have to worry anymore. And if not? What then?

Incompatible software

Sound does not work after the Windows update10, but the drivers are installed? In this situation, there are several options. And the first of them is incompatibility of the software with the operating system.

It is no longer a secret that Windows 10 isA huge problem for modern users. With this operating system, most software is not compatible. In this case, it is recommended or to find some driver for your sound card, which is suitable for "Windows 10", or replace the corresponding equipment. Yes, not the best methods, but they have a place to be. And, frankly, driver incompatibility with the system is a very common reason why after the Windows 10 update the sound on the laptop or computer does not work.

Equipment

Maybe a slightly different alignment. Especially it concerns those users who additionally connect the speakers to their computer. After the Windows 10 update does not work sound? What to do in this situation? Check for a driver on the computer. And if everything is in order, then it's time to look in the instructions to the columns. For what?

Maybe your equipment is incompatible withinstalled operating system. With the "ten" such phenomena occur very often. Users do not even suspect that not all hardware is working properly with this operating system. Moreover, old devices 100% will cease to function on the "top ten". Consider this.

What to do if you find incompatibilityequipment with the system? There are three options - or work with "Windows 10" without sound at all, or replace the operating system with an older version, or buy a column that will accurately begin to work properly with the "ten". What kind of decision to take - everyone decides for himself. But, as practice shows, users prefer to install themselves older versions of "Windows" to fix the situation.

Bad installation

But not everything is always as bad as it might seemat first sight. Sometimes the sound does not work after Windows 10 upgrade due to system failures during the installation process. In this case, you can observe a lot of errors and problems in the operating system. Users call this phenomenon a "curve setting".

How is the situation corrected? Quite easy and simple. All you need to do is reinstall Windows "10". It is advisable to format the hard disk before doing this. If after the reinstallation of any system failures and failures did not occur, then after restoring the drivers for the sound card, you can use the sound as before. Otherwise, the process will need to be repeated several times. However, constant reinstallations of the system with the purpose of the decision of problems with a sound do not suit users. They prefer to abandon the "dozens" and work on older versions, where there are not so many failures.

Browser

An important moment is for the modernuser and work with the Internet. Some note that they do not have sound in the browser after updating Windows 10. There may be several reasons for this phenomenon.

The first is the incompatibility of the software version with your operating system. In this case, you will have to install a browser that is designed to work in "Windows 10".

The second is a system failure. According to users, it helps here to reinstall your browser. Sometimes you can just restart your computer. Also helps, though not so often.

The third is the presence of viruses on the computer. However, if you have just updated the operating system, then this layout is not suitable. Otherwise, the computer will have to be cleaned of spies and other infections.

As you can see, the options that do not worksound after upgrading Windows 10, quite a lot. And not all of them are dangerous. Yes, this is not such a pleasant phenomenon, but on new operating systems this kind of "behavior" is extremely common. And it is necessary either to put up with it, or to refuse to work with innovations for a certain period of time.