How to sew a butterfly around the neck: a sequence of works

It often happens that the family is invited toofficial event, however the husband does not have a tie or he does not like to wear it. In this case, it can be replaced by a butterfly. And you can do it yourself. Before you sew a butterfly around your neck, you should always choose the right fabric and various accessories: lining, hooks for fastening.

For work you need the main fabric (satin oranother), a thread of a suitable shade, a chalk or a thin soap to mark out the material, a pattern and pins with which it will be fastened. Naturally, you will need a sewing machine, although such a thing can be done manually, although the procedure will have to be done very carefully.

Since sewing a butterfly around the neck is not very difficult, youspend only half a day. During the selection of fabric, preference should be given to dense materials. Otherwise the butterfly will not keep its shape. Without lining, you should not even begin work. In this case, non-woven fabric is suitable. It can be black or white, depending on the chosen basic fabric.

Since it is quite easy to sew a butterfly around the neck,special skills will not be required. But still, do not forget about some of the nuances: a neat line, ironing the material. Now it is necessary to remove the measure for the tie from the person for whom it is intended. You should also determine the size of the butterfly. If you do not know how to build patterns yourself, find a suitable option on specialized resources.

Before you sew a butterfly around your neck, dopattern on the main and lining fabric. Now we cut the cut out pattern onto the back side of the main material and circle the contour with the help of chalk. During the cutting of the parts of the product, a small indentation must be observed, which will then need to be swept. The allowance is usually up to 0.5 cm. Naturally, it is necessary to make two parts of the future butterfly, which will be sewn.

Before you sew a butterfly with your own hands,It is necessary to sweep the fleece to the main fabric. Naturally, all parts must be ironed. The main line should pass along the edges of the product, and then the workpiece should be turned and sewed on the sides. After that, the tie should be ironed again. Next, you need to fix the butterfly on the strip of tissue with which it will be tied to the neck.

It should be noted that the allowance should be cutas close to the seam, so that it does not spoil the shape of the product. During the eversion, you should also pay attention to the corners. Before final sewing, pull out the notch. In order for the corners to be smooth, sharp and neat, you should "push" them with a brush from the inside. During this process, you should be as careful as possible so as not to break the seam.

Keep in mind that during ironing, you needtake into account and how much of the product you need. For example, if it should be flat, then squeeze the iron very tightly. In order to fix the butterfly on the neck, you can use not only a strip of fabric, but also special plastic sliders.

That's all the instruction on how to sew a male butterfly yourself. If you did everything neatly, then you should get a very high quality and beautiful tie.

</ p>